Beeswax Food Wrap Refresher Bars

Depending on how often you use your food wraps, you’ll need to refresh them every 6 to 12 months for maximum stickiness!

Each bar is made with the perfect ratio of Canadian sourced beeswax, jojoba oil and pine resin to refresh your wraps. You can also use these for making new wraps, just be sure your fabric is 100% cotton.


HOW TO USE THESE BARS:
- Pop your bar into a clean jar and heat the jar in a pot of water on the stove until melted. The water level in the pot only has to be higher than the bar in the jar.
- Once your bar is melted, place your wrap on a parchment lined baking sheet into the oven at 300C for about 2 minutes or until the fabric looks wet. - Remove, and brush a light coat of the bar mixture evenly over the cloth.
- hang to dry is best, but since it only takes a couple of minutes, you could just hold it until it's dry. ;)


TIPS:
- It's possible to over-saturate the cloths, so start with a light coat and apply more as needed to get a more even saturation. If you get too much, you can apply another cloth on top to absorb the excess.
- You don't have to use a whole bar! Cut the bar in half and only heat that if you have one wrap to refresh.
- One bar will refresh one of our bundles of beeswax wraps (1 small, 1 medium, 1 large) or 2 7x7" new wraps.



*This listing is for one 30-40g bar
*This listing does not include beeswax wraps, only the refresher bar.
**Some yellowing may occur, this is natural and comes from the colour of the pine resin and beeswax